Back to Blog
Tips & Care 2026-11-05 Mojo Fun USA 0 views

Leopard Gecko Figure Won't Sit Flat? Fixes That Work

Leopard Gecko Figure Won't Sit Flat? Fixes That Work

A wobbling leopard gecko figure usually has a simple cause. Diagnose the symptom, fix the base, and know when to stop adjusting and display it another way.

Quick answer

Most leopard gecko figures wobble because the feet and belly rest on a surface that isn't truly flat, or because one foot sits slightly lower than the others. Check the surface first, then level the feet with a thin shim; stop adjusting once the figure sits without rocking and the pose still looks natural.

Why a reptile figure sits unevenly even when it looks fine

A figure can appear level by eye and still rock because the contact points are small. Leopard geckos rest low to the ground, so the belly and the undersides of the toes share the load. A tiny high spot under one toe lifts that corner and tips the body.

Before you change anything on the figure, test it on a known-flat surface such as a glass shelf or a stone countertop. If it rocks there too, the issue is the figure's base; if it sits still, the display surface is the problem.

When the fix is the display surface, not the figure

Shelves, wooden desks and textured mats are rarely perfectly flat. A soft mat can also let one foot sink while another stays high. Move the figure to a hard, flat surface and press down gently on each corner to see which point lifts.

If the figure sits flat on a hard surface but rocks on your shelf, add a thin, firm coaster or a small piece of flat cork under the whole figure rather than propping one foot. This keeps the pose level and spreads the weight.

The stop rule: when not to keep sanding or bending

Hand-painted figures can lose paint or detail if you sand or bend the feet repeatedly. If two rounds of shimming and surface checks don't settle the figure, stop. Display it on a slight incline, lean it against a small rock or hide the contact area with a flat base, or choose a different figure for that spot.

The same rule applies if the figure is part of a collection you want to keep pristine: a shim or a different shelf is safer than altering the model.

Diagnose the wobble in four checks

  • Symptom: rocks on every surface: Place the figure on a glass shelf or stone countertop and press each corner. If it still rocks, one or more feet are not level with the others. If it rocks on glass, the figure's base is the cause, not your shelf.
  • Likely cause: a high foot or a low belly: Slide a piece of paper under the lifted foot. If the rocking stops, that foot is short; if the belly still touches first, the figure needs a thin shim under the whole body. Use the paper test to tell a single-foot problem from a whole-body problem.
  • Corrective action: shim, don't sand: Cut a small piece of firm felt or cork and place it under the short foot or under the belly contact point. Trim until the figure sits without rocking and the pose still looks natural. Keep the shim hidden from the main viewing angle.
  • Stop point: two attempts, then change approach: If two shim adjustments don't fix the wobble, stop adjusting the figure. Display it on a flat base, lean it against a small prop, or move it to a shelf where the tilt is less visible. Repeated sanding or bending risks the painted finish.

Product facts

  • Leopard Gecko: Hand-painted, UK-designed figure made from durable PVC. The painted finish is the main reason to use shims and surface checks instead of sanding or bending the feet.
    Leopard Gecko
    Leopard Gecko

Related Articles

Customer Service
Home
Products
Cart
Profile