Atlantic Puffin Figure Won't Stand: Common Fixes
By Mojo Fun USA | Published: 2026-10-27
Category: How-to Guides
If your MOJO Atlantic Puffin figure won't stand, the issue is usually a warped foot or uneven base. Here's how to diagnose and fix it quickly.
Quick answer
A MOJO Atlantic Puffin figure typically won't stand because its feet are warped from packaging pressure or the surface is too slick. Warped feet can be gently rewarmed and reshaped.
Why your puffin might not stand
The MOJO Atlantic Puffin Wildlife Model Toy Figure is hand-painted and crafted from durable PVC, but like many small figurines, its thin legs and flat feet can bend slightly during shipping or storage. This doesn't mean the figure is damaged—just temporarily out of alignment.
Another common cause is a slippery display surface. Porcelain, glass, or polished wood offer little grip for lightweight PVC feet. Adding a simple non-slip pad can solve the issue without any adjustment to the figure.
When to consider a replacement
If the figure has a visible crack in the foot or leg, do not attempt to heat or bend it—this could worsen the damage. Also, if one leg is significantly shorter than the other due to a manufacturing defect, reshaping won't help. In these cases, contact the store for a replacement.
Minor warping is normal and fixable. The key is to know the difference between a bending issue and a structural break.
Diagnose & Fix Your Puffin Figure
- Symptom: The figure tilts to one side or falls over when placed on a flat surface. You may notice one foot is not flush with the table. Check both feet against a flat surface to confirm the issue.
- Likely cause: Warped foot or leg from packaging pressure, or a slippery surface that doesn't grip the smooth PVC feet. If the feet look even and flat, test on a textured surface like a cork coaster or rubber mouse pad.
- Corrective action: For warped feet: submerge the figure's feet in warm (not hot) water for 30–60 seconds. Remove, place on a flat surface, and gently press the feet until flat. Hold for a minute as it cools. For slippery surfaces: attach a small piece of museum putty or double-sided tape to the bottom of each foot. Stop if the figure resists bending—excessive force can break the leg.
- When to replace: If you see a crack, break, or one leg clearly shorter than the other after a careful visual inspection, do not attempt a DIY fix. Contact customer support for a replacement under the store's return policy.
About the MOJO Atlantic Puffin Figure
- Atlantic Puffin: The MOJO Atlantic Puffin is made from premium quality Polyvinyl Chloride (PVC), which is durable and safe for play. PVC is slightly flexible when warmed, allowing you to gently reshape warped feet without breaking the figure.
Atlantic Puffin
